|
CKL Electronics Co., Ltd.
-
Printed
circuit board PCB, Silver Epoxy Printing, Carbon Ink Printing, Nickel
Plating, Gold Plating |
|
CKL Electronics Co., Ltd. is a world
class, full service manufacturer, certified, and registered to ISO 9002,
QS900 operating systems conformance. CKL Electronics specializes in
Printed circuit board capabilities: single, double and multilayer
capabilities. Production process such as Silver Epoxy Printing, Carbon
Ink Printing, various Nickel & Gold Plating, Copper Plated Thru Hold and
Silver Epoxy Printed Thru Hole PCB.
Epoxy Printing: Epoxy printing is a
process where by the epoxy-based ink is printed on the surface of the
keycap. After the legend is printed on the keycap, the ink is left to
cure for a 24-hour period. Then a UV clear coat is applied over the
legend. The UV clear coat protects the printed legend from wear and tear
Laminated range, HASL, NI/AU Plating, PTF systems and laser trimming
services on-site, OSP capabilities, Full laboratory capabilities, for
chemical control of all processes.
High Resistance Carbon Printing;
Potentiometer at Resistance Range 1K-100K OHMS +/-20%
Ratio Resistance at +/-1%
Shunt Circuit Resistor PCB;
Resistance Range 5-50 MILLIOHMS +/-8%
Impedance/Differential Control at 50, 65, 75, 100 OHMS +/-10%
Hot Air Leveling (Soldering Surface Finishing)
Carbon Contact & Jumper Printing
Organic Coating (Entek Process) and Pb Free Project
Electroless Ni/Au finish 0.075 – 0.125 µm.thk (Immersion Gold)
Electroplating Gold (Bar connected)
Tab gold plating
Peelabel Soldermask Printing
Immersion Silver
Products & Services: Printed circuit board, Silver Epoxy
Printing, Carbon Ink Printing, Nickel Plating, Gold Plating
Categories: Electrical & Electronics
Contact: Orathai Padthummala
CKL Electronics Co., Ltd.
Address
139/2 Moo 2, Bangpa-In Industrial Estate,
Udomsorayuth Rd.,
T. Klongjik,
Amphur Bangpa-In,
Ayutthaya
13160
Telephone: 035 258-222
Fax:
035 258-226-7
email address: orathaip@cklpcb.com
Website: www.cklpcb.com |
