D.J. Oilfield Services (Thailand) Co.,Ltd.
Billy Mensforth Area Manager
14/18 "M" Floor, Floraville Building C, Soi Pattanakarn 51 Pattanakarn
Road,
Suanluang, Suanluang,
Bangkok 10250
Thailand
Tel : 02 722-3643
Fax :02 722-1963
239/17 Moo1, Tambol Satingmor,
Amphur Singhanakorn, Songkhla 90280, Thailand.
Tel : (+66) 0-7448-1507 to 9
Fax : (+66) 0-7448-1510
Contact Personnel: Pastor(Alex)Aranas (Operation Manager) HP : (+66)
08-1277-0927
Email : djskl@djthai.co.th
2002/1 Moo 2, Ware House 9
C/O Port of Sattahip Royal Thai Navy, Tambol Samasan, Amphur Sattahip,
Cholburi 20180, Thailand.
Tel : (+66) 0-9920-1861, 0-9920-1908
Fax : (+66) 0-1754-0630
Contact Personnel: Rudy Catipon (Base Manager)
HP : (+66) 08-1829-6198
Email : rudy@djthai.co.th
E-mail : juna@djthai.co.th
billy@djthai.co.th
Website : www.djthai.co.th
Categories: Oil & Petroleum, Foreign, Farlang |
|
|
DJ Oilfield Services (Thailand) Co., Ltd. was
incorporated in Bangkok Thailand on 1998 as a Thai entity of DJ
Inspection Worldwide. DJ Thailand (name in short) has a main office in
Bangkok (central) with two operation bases, one in Songkhla (south) and
one in Sattahip (north). The company employs 45 full time employees and
approximately 50 manpower contractors. DJ Thailand’s main contracts are
with oil companies namely Chevron, PTTEP, Hess, Pearl Oil, and numerous
drilling contractors and service companies such as Transocean Sedco
Forex, Smedvig, SantaFe, Vicksburg, Marlin Offshore/KCA Deutag, Mermaid,
Ensign, Halliburton, Weatherford.
DJ Thailand operates under ISO 9001:2000 Quality Management System (QSM)
accredited by American Petroleum Institute (API). DJ Thailand QSM is
also actively recognized and registered under API QR Spec Q1 Programs
for the Petroleum, Chemical and Natural Gas Industry.
The DJ Thailand Health Safety Security and Environment program has been
so effective clocking over a million manhours without a Lost Time
Incident since its operation started in 1998 up todate.
DJ Thailand and all employees are striving hard to achieve its mission
to be one of the best OCTG inspection, hard banding and tubular
maintenance service companies in the planet.
Visual Body Inspection
A thorough visual inspection of possible noticeable external damages
inflicted on the pipe is performed; most damages encountered arise from
handling of the pipe, such as dents and mashes. Other types of flags
will be external corrosion, laps, and straightness.
Visual Thread Inspection
Both pin and box ends are thoroughly cleaned and visually evaluated for
any damages, such as dents, corrosion, galled threads, etc.
API Drifting (Full-Length)
A drift, cut to strict API specifications, is passed through the
full-length bore of each length of pipe in order to check for mashed or
dented areas along the body. If an area has been located, the location
of the defect will be noted on the pipe as wellas on the inspection
report.
Electromagnetic Inspection (EMI)
Using a specialized Electromagnetic unit, detection of transverse or
3-dimensional defects can be located. Some locations are equipped with
4-function EMI units todetect longitudinal defects + wall loss in
addition to the aforementioned.
Ultrasonic Wall Thickness (UT)
Wall thickness is then verified by taking ultrasonic readings to
prove-up areas inquestion.
API Thread Gauging
Using various API gauges, such as thread taper, lead and depth, we are
able to measure the connection in order to verify it is within API
tolerances.
Full Length MPI
Utilizing a Capacitive Discharge Unit, the tubular’s full body is
magnetized; longitudinal defects are identified by using dry iron powder
sprinkled over the entire external surface of the pipe. |
